Hauraki Fenders provide premium marine fender solutions for your boat.
Engineered for performance and built tough to protect your pride and joy.

Enter our online store

Boat Fenders

Inflatable fenders

Supafend Fenders

Rectangle Inflatable fenders

Hurricane fenders

---

Fender Covers

Fleece Fender Covers

Neoprene Fender Covers

---

Marina Fenders

Marina Series

Grand Pacific Fenders

---

Dock Wheels

Marinaquip Dock Wheels

Grand Pacific Dock Wheels

---

Marina Berth Setup - Auckland Region

If you would like us to setup your marina berth with fenders, ropes, dock wheels, or any combination of these, please call Jacqui on +64 27 375 8323 or Damon on +64 27 210 0941 and we will gladly discuss all the options with you.  Alternatively, please send us an email.  ​

Marina Berth Setup

---

Marina and Dock Lines

Dock Line

---

Watch how easy it is to use a Hauraki Fender

---

Our Products at a Glance 

Inflatable Fenders

​Simply inflate to use, then deflate to store.  Made from heavy duty 1.2mm thick, non-marking PVC fabric.  Our fenders are built tough using only heat and high frequency welding technology.  No glue is used in the construction of our fenders, so the joins and attachments will not degrade over time.  Each fender has a reinforced 316SS D-ring attachment point at each end meaning they can be hung horizontally or vertically.  Fitted with a standard marine inflatable boat inflation valve. Either a normal inflatable boat pump or a small electric pump can be used to inflate the fenders. The fenders can be easily deflated and rolled up to a compact size for easy storage.

---

Rectangle Inflatable Fenders

​Simply inflate to use, then deflate to store.  Utilizing non-marking PVC with drop stitch technology, we have created a rectangle inflatable fender.  Perfect for all those situations when a round fender rolls away.  Our fenders are built tough using only heat and high frequency welding technology.  No glue is used in the construction of our fenders, so the joins and attachments will not degrade over time.  ​Each fender has four reinforced 316SS D-ring attachment points.  Fitted with a standard marine inflatable boat inflation valve. Either a normal inflatable boat pump or a small electric pump can be used to inflate the fenders. The fenders can be easily deflated and rolled up to a compact size for easy storage.

---

Supafend Fenders

Supafend are Australia's leading brand of marine fender - exclusive to Hauraki Fenders.  The Fenders are rotationally molded in one piece from non-marking, UV stabilized, marine grade PVC. The controlled manufacturing process creates a fender with consistent wall thickness and specially designed extra heavy-duty rope eyelet ends. These fenders are built tough to last. Every fender is factory tested prior to packaging and dispatch to ensure they will provide maximum durability and reliability.

---

Hurricane Fenders

As the name suggests, our Hurricane Fenders are built tough to withstand the most extreme conditions.  Constructed from heavy duty closed cell foam and encased in a hard-wearing PVC fabric shell.  The attachment points are created using a continuous webbing that passes all the way underneath the fender ensuring any load is transmitted directly to the attachment points, rather than through the PVC cover.  These fenders are made to order so we can incorporate any custom requirements you may have and provide exactly what you need.  

---

Fleece Fender Covers

Our Fleece Fender Covers provide abrasion and UV protection for your inflatable fenders while also enhancing the appearance of your boat.  They are a top-quality New Zealand made product ensuring a superior fit and look.  They are best suited for boats rafting together.  Our grey marle fender cover fabric and is UV stabilised and has unique stretching capabilities so it fits snug and will not fade.  The UV rated polyester thread, top stitching and reinforcing around the D-ring slot all add to the superior quality.  The fender covers do not need to be removed to inflate or deflate the fender.

---

Neoprene Fender Covers 

Our Neoprene Fender Covers are the best you can get.  They provide premium protection for your boat and paint job, while also protecting your fenders from UV and abrasion damage.  The covers are reversible up and down, as well as inside out, meaning you can get up to 4 x the life out of them.  They are manufactured in New Zealand from a AAA-UV rated neoprene comprising of a soft-closed-cell foam rubber with a stretchable nylon fabric either side meaning they do not absorb water and are resilient to algae growth.  The covers are a nice snug fit and do not need to remove the cover to inflate or deflate the fender.  

---

Marina Series Fenders

Our marina series fenders are built tough to withstand the most extreme marina berthing situations.  They are constructed from dual density, UV stabilised, closed cell, white EVA foam.  The exterior layers are dense, non marking with a gloss finish while the interior is softer allowing for shock absorption and shape contortion.  The smooth, non-marking exterior contact surface allows your boat to slip along the fender rather than gripping and damaging the fenders and turning your vessel in the berth as PVC covered fenders tend to do.

---

Grand Pacific Marina Fenders

​Grand Pacific marina fenders are specially designed for boats up to 35 ton and to fit most marina pontoon profiles with a fixed fender strip.  They are constructed from Heavy duty, UV resistant tri-laminated vinyl, are reinforced in high load areas, are fully welded, waterproof, and washable.  They do not absorb water and cannot deflate if punctured due to the internal closed cell foam padding.  They come complete with 316 stainless steel eyelets top and bottom and installation screws.

---

Marinaquip Dock Wheels

​Marinaquip docking wheels are made from molded polyurethane for cushioning and boat protection.  It is installed over an injection molded polyethylene wheel rim allowing the wheel to turn smoothly around the bracket axle.  The wheel cannot deflate, go flat or puncture and the anti-lift plate ensures the wheel stays in position.
The large 75mm diameter axle and 6mm bracket plate, both made from highly polished 316 stainless steel, do not require greasing or any maintenance.  The bracket is fastened to the dock from the top and side, allowing a strong and reliable installation to be achieved.

---

Grand Pacific Dock Wheels

​Marinaquip docking wheels are made from molded polyurethane for cushioning and boat protection.  It is installed over an injection molded polyethylene wheel rim allowing the wheel to turn smoothly around the bracket axle.  The wheel cannot deflate, go flat or puncture and the anti-lift plate ensures the wheel stays in position.
The large 75mm diameter axle and 6mm bracket plate, both made from highly polished 316 stainless steel, do not require greasing or any maintenance.  The bracket is fastened to the dock from the top and side, allowing a strong and reliable installation to be achieved.

---

Dock Lines

​Pro Splice is the latest in dock and mooring line technology.  It combines superior strength, stretch and weight characteristics with a hollow core giving it the unique ability to be spliced and re-spliced at any time during its life cycle.  This allows you to easily adjust the loops and lengths of your mooring or dock lines at any time. 
It is constructed from highly twisted UV stabilised polyester with high elongation and flexibility, exactly what is needed in a dock line.  This dock line is second to none.